Hydrophilic PTFE Pleated membrane filters is suits to liquids sterile filtration. Its has excellent chemical compability and corrosion resistance. It’s saves time by operation without prewetting.
| Filter Media | Hydrophilic PVDF Membrane |
| Support Layers | Polypropylene |
| Micron Rating | 0.11, 0.22, .65, 1, µ |
| Inner Core | Reinforced Polypropylene |
| Outer Cage / End Cap | Reinforced Polypropylene |
| Seal Method | Thermal Bonded, No Adhesives |
| O-Rings / Gaskets | Silicone, Nitrile, EPDM, Viton, Teflon |
| Outer Diameter | 69mm |
| Inner Diameter | 33mm |
| Length | 10″, 20″, 30″, 40″ …. 80″ |
| Filtration Area | 0.65 m² per 10″ |
| Normal Operating Temprature | Up to 65°C(149°F) |
| Max. Operating Temprature | 90°C(194°F) at ^ ≤ 1.0 bar (14.5 psi) |
| Normal Flow Direction | 4.2 Bar (60.9 psi) at 25°C(77°F) |
| Reverse Flow Direction | 2.1 Bar (30.5psi) at 25°C(77°F) |
| PH Value Compatibility | 1-13 |
| Endotoxin | < 0.25 EU/ml |
| Extractables | 0.03g/10″ |
| Micron | End Cap Types | Length | O-Ring /Gasket | ||
| 0.11 µ | 215 O-ring & Flat | 222 Long O-ring & Flat | 226 O-ring & Flat | 5″ | Slicone |
| 0.22 µ | 215 O-ring & Fin1 | 222 Long O-ring & Fin 1 | 226 O-ring & Fin 1 | 10″ | EPDM |
| 0.66 µ | 215 O-ring & Fin2 | 222 Long O-Ring & Fin 2 | 226 O-Ring & Fin 2 | 20″ | Viton |
| 1 µ | 222 Short O-ring & Flat | 30″ | Nitrile | ||
| 222 Short O-ring & Fin 1 | 40″ | Teflon | |||
| 222 Short O-Ring & Fin 2 | 50″ |