This product is constructed from nylon 6 media and nonwoven support materials.This materials are producing in clean room and flushing with ultrapure water.
| Filter Media | Hydrophilic Nylon6, Membrane |
| Support Layers | Polypropylene |
| Micron Rating | 0.11, 0.22, 0.45, 1µ |
| Inner Core | Polypropylene |
| Outer Cage / End Cap | Polypropylene |
| Seal Method | Thermal Bonded, No Adhesives |
| O-Rings / Gaskets | Silicone, Nitrile, EPDM, Viton, Teflon |
| Outer Diameter | 69mm |
| Inner Diameter | 33mm |
| Length | 10″, 20″, 30″, 40″ …. 80″ |
| Filtration Area | 0.65 m² per 10″ |
| Normal Operating Temprature | Up to 65°C(140°F) |
| Max. Operating Temprature | 80°C(176°F) at ^ ≤ 1.0 bar (14.5 psi) |
| Normal Flow Direction | 4.2 Bar (60.9 psi) at 25°C(77°F) |
| Reverse Flow Direction | 2.1 Bar (30.5psi) at 25°C(77°F) |
| PH Value Compatibility | 6-14 |
0
| Endotoxin | < 0.25 EU/ml |
| Extractables | 0.03g/10″ |
| Micron | End Cap Types | Length | O-Ring /Gasket | ||
| 0.11 µ | 215 O-ring & Flat | 222 Long O-ring & Flat | 226 O-ring & Flat | 5″ | Slicone |
| 0.22 µ | 215 O-ring & Fin1 | 222 Long O-ring & Fin 1 | 226 O-ring & Fin 1 | 10″ | EPDM |
| 0.45 µ | 215 O-ring & Fin2 | 222 Long O-Ring & Fin 2 | 226 O-Ring & Fin 2 | 20″ | Viton |
| 1 µ | 222 Short O-ring & Flat | 30″ | Nitrile | ||
| 222 Short O-ring & Fin 1 | 40″ | Teflon | |||
| 222 Short O-Ring & Fin 2 | 50″ |