The Pleated filter has big filtration area, hydrophobic media has high flow rate and low pressure drop when filtrate gas and air. High effiency area and micro holes in the media enlarge the dirt holding capaicty which result in long service life.
| Filter Media | Glass Fiber(GF) |
| Support Layers | Polypropylene |
| Micron Rating. | 0.45, 1, 3, 5, 10 µ |
| Inner Core | Polypropylene |
| Outer Cage / End Cap | Polypropylene |
| Seal Method | Thermal Bonded, No Adhesives |
| O-Rings / Gaskets | Silicone, Nitrile, EPDM, Viton, Teflon |
| Filtration Effiency | ≥ 90% |
| Outer Diameter | 69mm |
| Inner Diameter | 33mm |
| Length | 10″, 20″, 30″, 40″ …. 80″ |
| Filtration Area | 0.5 m² per 10″ |
| Normal Operating Temprature | Up to 60°C(140°F) |
| Max. Operating Temprature | 85°C(185°F) at P ≤ 1.0 bar (14.5 psi) |
| Normal Flow Direction | 4.2 Bar (60.9 psi) at 25°C(77°F) |
| Reverse Flow Direction | 2.1 Bar (30.5psi) at 25°C(77°F) |
| PH Value Compatibility | 1-13 |
0
| Endotoxin | < 0.25 EU/ml |
| Extractables | 0.03g/10″ |
| Micron | End Cap Types | Length | O-Ring /Gasket | ||
| 0.45 µ | 215 O-ring & Flat | 222 Long O-ring & Flat | 226 O-ring & Flat | 5″ | Slicone |
| 1 µ | 215 O-ring & Fin1 | 222 Long O-ring & Fin 1 | 226 O-ring & Fin 1 | 10″ | EPDM |
| 3 µ | 215 O-ring & Fin2 | 222 Long O-Ring & Fin 2 | 226 O-Ring & Fin 2 | 20″ | Viton |
| 5 µ | 222 Short O-ring & Flat | 30″ | Nitrile | ||
| 10 µ | 222 Short O-ring & Fin 1 | 40″ | Teflon | ||
| 222 Short O-Ring & Fin 2 | 50″ |