PTFE Series Pleated Membrane Filters has Hydrophilic PTFE membrane which provide excellent chemical compability. It has good tolerance to various chemical and can be used for filtering kinds of corrosive liquids and gases.
| Filter Media | Hydrophilic PTFE Membrane |
| Support Layers | Polypropylene |
| Micron Rating | 0.11, 0.22, 0.45, 1 µ |
| Inner Core | Reinforced Polypropylene / Steinless Steel |
| Outer Cage / End Cap | Reinforced Polypropylene / Steinless Steel Insert |
| Seal Method | Thermal Bonded, No Adhesives |
| O-Rings / Gaskets | Silicone, Nitrile, EPDM, Viton, Teflon |
| Outer Diameter | 69mm |
| Inner Diameter | 33mm |
| Length | 10″, 20″, 30″, 40″ …. 80″ |
| Filtration Area | 0.65 m² per 10″ |
| Normal Operating Temprature | Up to 65°C(149°F) |
| Max. Operating Temprature | 90°C(194°F) at ^ ≤ 1.0 bar (14.5 psi) |
| Normal Flow Direction | 4.2 Bar (60.9 psi) at 25°C(77°F) |
| Reverse Flow Direction | 2.1 Bar (30.5psi) at 25°C(77°F) |
| PH Value Compatibility | 1-14 |
| Endotoxin | < 0.25 EU/ml |
| Extractables | 0.03g/10″ |
| Micron | End Cap Types | Length | O-Ring /Gasket | ||
| 0.11 µ | 215 O-ring & Flat | 222 Long O-ring & Flat | 226 O-ring & Flat | 5″ | Slicone |
| 0.22 µ | 215 O-ring & Fin1 | 222 Long O-ring & Fin 1 | 226 O-ring & Fin 1 | 10″ | EPDM |
| 0.45 µ | 215 O-ring & Fin2 | 222 Long O-Ring & Fin 2 | 226 O-Ring & Fin 2 | 20″ | Viton |
| 1 µ | 222 Short O-ring & Flat | 30″ | Nitrile | ||
| 222 Short O-ring & Fin 1 | 40″ | Teflon | |||
| 222 Short O-Ring & Fin 2 | 50″ |