PES Series Pleated Membrane Filters

Product Description

Pes Series Pleated Membrane Filters is using asymmetric PES membrane to sterilized filtration for water, mineral water, wine, beer and other beverages producting. Thanks to its structure PES Membrane Filters provides high dirt holding capacity and long service life.

Caps & Gaskets

Main Features

  • Asmmetric membrane structure
  • Reinforced Core Structure
  • The pores of membrace uniformly distributed
  • High Flow Rate
  • Highly hydrophilic membrane

Application Areas

  • Pharmaceutics
  • Food and Bevarage Production
  • Microelectronics
  • Fine Chemical

Pressure / Flow Table

Product Specifications

Filter MediaAsymmetric PES Membrane
Support LayersPolypropylene
Micron Rating0.11,0.22, .045, 0.65, 1 µ
Inner CoreReinforced Polypropylene
Outer Cage / End CapReinforced Polypropylene
Seal MethodThermal Bonded, No Adhesives
O-Rings / GasketsSilicone, Nitrile, EPDM, Viton, Teflon
Outer Diameter69mm
Inner Diameter33mm
Length10″, 20″, 30″, 40″ …. 80″
Filtration Area0.65 m² per 10″
Normal Operating TempratureUp to 60°C(140°F)
Max.  Operating Temprature85°C(185°F) at ^ ≤ 1.0 bar (14.5 psi)
Normal Flow Direction4.2 Bar (60.9 psi) at 25°C(77°F)
Reverse Flow Direction2.1 Bar (30.5psi) at 25°C(77°F)
PH Value Compatibility2-13
Endotoxin< 0.25 EU/ml
Extractables0.03g/10″

Order Information

Micron End Cap Types Length O-Ring /Gasket
0.04 µ 215 O-ring & Flat 222 Long O-ring & Flat 226 O-ring & Flat 5″ Slicone
0.11 µ 215 O-ring & Fin1 222 Long O-ring & Fin 1 226 O-ring & Fin 1 10″ EPDM
0.22 µ 215 O-ring & Fin2 222 Long O-Ring & Fin 2 226 O-Ring & Fin 2 20″ Viton
0.45 µ 222 Short O-ring & Flat 30″ Nitrile
0.65 µ 222 Short O-ring & Fin 1 40″ Teflon
1 µ 222 Short O-Ring & Fin 2 50″
TOP