NYLON N6 Series Pleated Membrane Filters

Product Description

This product is constructed from nylon 6 media and nonwoven support materials.This materials are producing in clean room and flushing with ultrapure water.

Caps & Gaskets

Main Features

  • High filtration effiency
  • 100% Integrity tested
  • Low Precipitation

Application Areas

  • Pharmaceutics
  • Food and Bevarage Production
  • Microelectronics
  • Fine Chemical

Pressure / Flow Table

Product Specifications

Filter MediaHydrophilic Nylon6, Membrane
Support LayersPolypropylene
Micron Rating0.11, 0.22, 0.45, 1µ
Inner CorePolypropylene 
Outer Cage / End CapPolypropylene
Seal MethodThermal Bonded, No Adhesives
O-Rings / GasketsSilicone, Nitrile, EPDM, Viton, Teflon
Outer Diameter69mm
Inner Diameter33mm
Length10″, 20″, 30″, 40″ …. 80″
Filtration Area0.65 m² per 10″
Normal Operating TempratureUp to 65°C(140°F)
Max.  Operating Temprature80°C(176°F) at ^ ≤ 1.0 bar (14.5 psi)
Normal Flow Direction4.2 Bar (60.9 psi) at 25°C(77°F)
Reverse Flow Direction2.1 Bar (30.5psi) at 25°C(77°F)
PH Value Compatibility6-14

0

Endotoxin< 0.25 EU/ml
Extractables0.03g/10″

Order Information

Micron End Cap Types Length O-Ring /Gasket
0.11 µ 215 O-ring & Flat 222 Long O-ring & Flat 226 O-ring & Flat 5″ Slicone
0.22 µ 215 O-ring & Fin1 222 Long O-ring & Fin 1 226 O-ring & Fin 1 10″ EPDM
0.45 µ 215 O-ring & Fin2 222 Long O-Ring & Fin 2 226 O-Ring & Fin 2 20″ Viton
1 µ 222 Short O-ring & Flat 30″ Nitrile
222 Short O-ring & Fin 1 40″ Teflon
222 Short O-Ring & Fin 2 50″
TOP