GF Series Pleated Membrane Filters

Product Description

The Pleated filter has big filtration area, hydrophobic media has high flow rate and low pressure drop when filtrate gas and air. High effiency area and micro holes in the media enlarge the dirt holding capaicty which result in long service life.

Caps & Gaskets

Main Features

  • Big filtration area
  • High flow rate
  • Low pressure drop

Application Areas

  • Pharmaceutics
  • Food and Bevarage Production
  • Microelectronics
  • Fine Chemical

Pressure / Flow Table

Product Specifications

Filter MediaGlass Fiber(GF)
Support LayersPolypropylene
Micron Rating.0.45, 1, 3, 5, 10 µ
Inner CorePolypropylene
Outer Cage / End CapPolypropylene
Seal MethodThermal Bonded, No Adhesives
O-Rings / GasketsSilicone, Nitrile, EPDM, Viton, Teflon
Filtration Effiency≥ 90%
Outer Diameter69mm
Inner Diameter33mm
Length10″, 20″, 30″, 40″ …. 80″
Filtration Area0.5 m² per 10″
Normal Operating TempratureUp to 60°C(140°F)
Max.  Operating Temprature85°C(185°F) at P ≤ 1.0 bar (14.5 psi)
Normal Flow Direction4.2 Bar (60.9 psi) at 25°C(77°F)
Reverse Flow Direction2.1 Bar (30.5psi) at 25°C(77°F)
PH Value Compatibility1-13

0

Endotoxin< 0.25 EU/ml
Extractables0.03g/10″

Order Information

Micron End Cap Types Length O-Ring /Gasket
0.45 µ 215 O-ring & Flat 222 Long O-ring & Flat 226 O-ring & Flat 5″ Slicone
1 µ 215 O-ring & Fin1 222 Long O-ring & Fin 1 226 O-ring & Fin 1 10″ EPDM
3 µ 215 O-ring & Fin2 222 Long O-Ring & Fin 2 226 O-Ring & Fin 2 20″ Viton
5 µ 222 Short O-ring & Flat 30″ Nitrile
10 µ 222 Short O-ring & Fin 1 40″ Teflon
222 Short O-Ring & Fin 2 50″
TOP